Short answer: a professionally installed paver patio or driveway in South Florida typically runs about $14 to $25 per square foot, materials, base and labor included. Where you land depends on the paver you choose, how much prep and demolition the site needs, and the size and shape of the project.
Pavers are one of the highest-impact upgrades you can make to a South Florida home — a new driveway or patio changes the entire look of the property. But "what will it cost?" is always the first question, so here's an honest breakdown before you get a quote.
What drives the price of a paver project
- Paver type. Standard concrete pavers cost less; premium, porcelain or travertine-look pavers cost more per square foot.
- Base & prep. The compacted base is the part you never see and the part that decides whether your driveway holds up. Excavation, base material and compaction are a big share of the cost.
- Demolition. Tearing out and hauling away an old concrete slab or driveway adds labor and dump fees.
- Size & shape. Large, simple rectangles are the most economical per foot. Curves, borders, steps and tight areas add cutting and labor.
- Extras. Decorative borders, multiple colors, sealing, drainage and lighting all add to the total — and to the finished look.
Typical paver price ranges in South Florida (2026)
Treat these as starting-point ranges, not a quote. They include quality pavers, a proper base and professional installation:
| Project | Rough size | Typical installed range |
|---|---|---|
| Small patio | ~200 sq ft | $16–$25/sq ft |
| Standard driveway | ~600 sq ft | $14–$22/sq ft |
| Large patio + walkway | 800+ sq ft | $14–$20/sq ft |
South Florida reality check: the cheapest bid is rarely the cheapest driveway. A thin or poorly compacted base saves money on day one and shows up as sunken, shifting pavers a couple of rainy seasons later. Always ask what's going under the pavers.
Is a paver patio or driveway worth it?
For most homes, yes. Pavers add real curb appeal and resale value, they flex with our shifting soil instead of cracking like concrete, and any damaged section can be lifted and re-laid without demolition. That repairability is a big part of why pavers hold their value in our climate.
What affects your exact quote
When we come out for a free estimate, the biggest variables are the paver you choose, whether there's an old slab to demolish, and any drainage or grading the site needs. A clean, open, rectangular area is the most affordable; a curved patio with demolition and drainage sits higher. Wherever you are — Kendall, Hollywood or anywhere in our South Florida service area — your quote should come with a clear scope. Learn more on our pavers & hardscaping page, or pair it with artificial turf for a complete yard.
How much does a paver patio cost in South Florida?
A professionally installed paver patio typically runs about $14 to $25 per square foot, including quality pavers, a proper base and labor. Smaller or more detailed patios land at the higher end; larger simple areas are more economical per foot.
How much does a paver driveway cost?
Most paver driveways in South Florida run about $14 to $22 per square foot installed. Demolition of an old slab, premium pavers and drainage work push the number up.
Are pavers cheaper than concrete?
No — pavers cost more to install than poured concrete. But they add more curb appeal and resale value, flex with our soil instead of cracking, and are far cheaper and cleaner to repair over time.
What makes a paver job more expensive?
Premium paver types, tearing out an old driveway, curves and borders, extra drainage and grading, sealing, and small or tight areas all raise the per-square-foot price.